Annual sales of Swiss engineering PEEK plate imports plus fiber PEEK PEEK sheet annual sales of Swiss engineering PEEK plate imports plus fiber PEEK PEEK plate PEEK (polyether ether ketone) materials, high continuous use temperature (about 260 degrees) also has a very high stiffness and hardness, as well as unique high tensile strength and fatigue strength. In addition the heat deformation properties and chemical stability and taste. When the temperature reaches 260 degrees before the material has excellent dielectric properties and resistance to energy ray irradiation. PEEK has excellent overall performance, good mechanical properties, high temperature resistance, excellent chemical resistance, making it the most common high-grade plastic. Features: air, the maximum allowable operating temperature is very high (260OC continue to work, short-term up to 310OC), high mechanical strength, stiffness and hardness, high temperature, excellent chemical resistance and hydrolysis resistance, excellent wear and friction performance, high creep strength, excellent dimensional stability, excellent UV resistance, excellent resistance to high-energy radiation, the inherent low flammability, and less smoke when burned. Applications: PEEK in the aerospace, medical, pharmaceutical and food processing industries are very common applications such as gas analyzer on the satellite structure, heat exchanger scraper; because of their superior friction properties, ideal for applications in friction materials, such as sleeve bearings, plain bearings, valve seats, seals, pump wear rings and so on. Specifications: Material: thick x width to length = 5 ~ 100mm x 500x1000mm thick x width to length = 5 ~ 100mmx 610x 1200mm bar: diameter x length = 3 ~ 200mm x 1000mm color: brown gray / black 1, PEEK-1000 (brownish gray ) using pure polyether ether ketone resin as a raw material, in all PEEK level best toughness, impact best. PEEK-1000 can use the most convenient way for disinfection sterilization (steam, dry heat, ethanol, and Y-rays), and the manufacture of raw ingredients PEEK-1000 in line with EU and US FDA regulations for food to be in nature, these features make it fit in medical, pharmaceutical and food processing industry has been very widely used. 2, PEEK-HPV (black) is added PTFE, graphite and carbon fibers results, make PEEK-HPV become bearing grade plastic. Its excellent tribological properties (low coefficient of friction, wear resistance, high peak pressure limit) level of friction makes this an ideal material applications. 3, PEEK-GF30 (brownish gray level of the reinforced plastics material filled with 30% glass fiber, have better rigidity and creep resistance than PEEK-1000, and better dimensional stability, it is preferable manufacturing structural parts Can withstand high temperatures for a long time fixed load such as the use of PEEK-GF30 as a slider, you should carefully examine its suitability as glass fibers with surface scratches. 4, PEEK-CA30 (black) filled with 30% of the carbon fiber material Enhanced than PEEK-GF30 has better mechanical properties (high elastic modulus, mechanical strength and creep) and more wear-resistant, and with carbon fiber reinforced plastic than unreinforced PEEK plastic having thermal conductivity 3.5 times - faster heat dissipation from the bearing surface.